Offering GAMUT Hydraulic Copy turning Lathe. GAMUT LATHE TRACERS are made by Graded Casting and have been Robustly constructed to take maximum cut with hardened tool post and very sensitive and precise Copy Valve to render trouble free longer service. GAMUT TRACER can be mounted at rear or front of a lathe machine and can be operated by semiskilled personnel. Inspection time is drastically reduced and production is increased by many times within accuracy of 0.025mm when use good lathes
Our clients can avail from us a wide variety Circular Sawing Machine For Cutting Pipes / Tubes / Rods.
Manufacturing using quality assured components by our vendors, all these imported machines are in great demanded among our clients. Quality tested at each level, we are offering the below listed range of machines in this category:
We offer our 'GAMUT' Brand HSS Circular Saw Blades which are made from the best grade of metals DMO5 for cutting various types of materials of tubes, pipes, sections and solid steel based materials in ferrous and nonferrous
We are providing only high grade of heat resistant coated ‘GAMUT’ Brand HSS Circular Saw Blade i.e. TiCN and TiAlN. These 'GAMUT' Saws are properly PVD coated for high resistant against abrasions and wear.
The 'GAMUT' Saw Blades suitable for both semi- automatic and fully automatic High Speed Circular Sawing Machines, these ensure clean, cool and dust free cutting in industries.
We are providing almost all size of ‘GAMUT’ Saw Blades at very competitive prices.
Gamut Vertical Broaching Machines are Pull Down Type and Hydraulically operated. These machines are precisely made with hardened, ground and chrome plated 4 guide bar with suitable linear guide bushes fitted on Broach puller holding guide plate which are bored on highly precise jig boring machine to maintained centerline with allied machine parts and suitably heat treated to give maximum accuracy continuously. These machines are robustly constructed to minimized vibration during Broaching operation.
Built in Coolant Equipment
Built in Hydraulic Power pack
Broach pullers to suit broach shank with guide plate.
Broach holding guide plate move up and down on 4 Hardened and ground guide bar.
Broach guide bush for tail end to suit broach shank in case of Broach Retriever System
Hydraulic Rotary Cylinders are suitable for operating Hydraulic Chuck or Collets. This cylinder is mounted on the back side of Lathe spindle and it operates the chuck or collet through a draw bar attached with piston rod of cylinder. A non-contacting type rotary joint is provided with cylinder which is free from maintenance. This joint gives certain amount of oil-leakage for which one outlet is provided. Cylinder is mounted in horizontal position.