Gamut Machine Tools
Thakurli, Dombivli, Thane, Maharashtra
GST No. 27APPPS1375E1ZJ
TrustSEAL Verified
Call 08048964777 80% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 2 Piece |
| Max Swing Over Bed | 250 mm |
| Bed Length | 5.5 Feet |
| Usage/Application | Industrial |
| Height of Centre | 165 mm |
| Spindle Bore | 38 mm |
| Automation Grade | Automatic |
| Voltage | 415 V |
| Power(W) | 2 HP |
| Frequency | 50 HZ |
| Phase | 3 Phase |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Usage/Application | Industrial |
| Product Type | Lathe Attachment |
| Working Pressure | 18 Bar |
| Model Name/Number | SC-5660 |
| Material | Mild Steel |
| Power Consumption | 2 HP |
| Stroke of Tracing Slide | 60 mm |
| Max.Dia of Round Master | 90 mm |
| Max. length of Rail | 500 mm |
| Theoretical Thrust | 190 Kg |
Self contained Tracing System includes GAMUT Single Axis Tracer mounted on independent longitudinal hydraulic feed slide with 0~40mm/second speed variation control, Hydraulic direction control and Electric controls to achieve complete Automatic 2-cut one rough and one 0~1.5mm preset finish cut Auto cycle.
Operator is required to load the job, press the Auto start button and unload the job after completion of the cycle.
This system is very much useful where the lathe machine’s bed is worn out and can’t be use.
The system include Automatic Tracing slide, Hydraulic Longitudinal Feed slide, Round master holding device, Dual delivery Hydraulic power pack with control valves, Electric Control panel and Hose pipe set.
Product Details:
| Minimum Order Quantity | 2 Piece |
| Usage/Application | Industrial |
| Working Pressure | 18 Bar |
| Machine Type | Belt Driven Lathe Machine |
| Automation Grade | Automatic |
| Model Name/Number | SC-7090 |
| Power Consumption | 2 HP |
| Stroke of Longitudinal Feed Slide | 200 mm |
| Max. Dia of Round master | 90 mm |
| Theoretical Thrust | 300 Kg |
| Recommended tool shank | 25*25 mm |
Self contained Tracing System includes GAMUT Single Axis Tracer mounted on independent longitudinal hydraulic feed slide with 0~40mm/second speed variation control, Hydraulic direction control and Electric controls to achieve complete Automatic 2-cut one rough and one 0~1.5mm preset finish cut Auto cycle.
Operator is required to load the job, press the Auto start button and unload the job after completion of the cycle.
This system is very much useful where the lathe machine’s bed is worn out and can’t be use.
The system include Automatic Tracing slide, Hydraulic Longitudinal Feed slide, Round master holding device, Dual delivery Hydraulic power pack with control valves, Electric Control panel and Hose pipe set.
Additional Information:
Product Details:
| Minimum Order Quantity | 2 Piece |
| Max Swing Over Bed | 250 mm |
| Bed Length | 4.5 Feet |
| Height of Centre | 165 mm |
| Spindle Bore | 38 mm |
| Machine Type | All Geared Head Lathe Machine |
| Automation Grade | Automatic |
| Brand/Make | Gamut |
| Power | 2 HP |
| Voltage | 415 V |
| Frequency | 50 Hz |
Auto Programmed Cycle Tracer System includes Single Axis Tracer with Hydraulic control valves, Dual Delivery Power pack, Control Panel, Feed Cylinder to move lathe saddle longitudinally forward-Reversed and Limit switches.
Product Details:
| Minimum Order Quantity | 2 Piece |
| Max Swing Over Bed | 250 mm |
| Usage/Application | Copy Turning |
| Bed Length | 4.5 Feet |
| Product Type | Automatic Copy Turning Attachment |
| Height of Centre | 165 mm |
| Surface Finishing | Smooth |
| Spindle Bore | 38 mm |
| Working Pressure | 18 Bar |
| Automation Grade | Automatic |
| Model Number/Name | SC-5660 |
| Layout | Horizontal |
| Material | Iron Casting |
| Color | Green |
Self contained Tracing System includes Gamut Single Axis Tracer mounted on independent longitudinal hydraulic feed slide with 0~40mm/second speed variation control, Hydraulic direction control and Electric controls to achieve complete Automatic 2-cut one rough and one 0~1.5mm preset finish cut Auto cycle.
Operator is required to load the job, press the Auto start button and unload the job after completion of the cycle.
This system is very much useful where the lathe machine’s bed is worn out and can’t be use.
The system include Automatic Tracing slide, Hydraulic Longitudinal Feed slide, Round master holding device, Dual delivery Hydraulic power pack with control valves, Electric Control panel and Hose pipe set.